2019 Bentley Mulsanne Speed Base Pricing and Spec

The 2019 Bentley Mulsanne Speed Base is a rear-wheel drive four-door sedan that was released to the Australian market on 121st May 2019 classified as a 3Y MY20. The Bentley Mulsanne Speed is regarded as a 4d sedan built in United Kingdom with prices from a dealer as a used car starting at $346,000.

The Bentley Mulsanne Speed is a rear-wheel drive 4 door with 5 seats, powered by a 6.8L TWIN TURBO V8 engine that has 377 kW of power (at 4000 rpm) and 1020 Nm of torque (at 1750 rpm) via an Eight-speed Automatic. Bentley claims the Mulsanne Speed Base uses 15L/100km of Premium Unleaded Petrol in the combined city and highway cycle while putting out 342g of CO₂. It has a 96L fuel tank, meaning it should be able to travel 640km per full tank.

The Bentley Mulsanne Speed measures 1521mm (59.9 inches) in height, 5575mm (219.5 inches) in length, 1926mm (75.8 inches) in width with a 3266mm (128.6 inches) wheelbase that brings about a total of 2685kg (5919.4 lbs) of unladen weight. The Mulsanne Speed Base comes standard with 265/40 ZR21 front tyres and 265/40 ZR21 rear tyres. It requires a service every 12 months or 16,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.

The 2019 Bentley Mulsanne Speed Base has a 145mm ground clearance It has a final gear ratio of 2.92.

The VIN number can be found on the Driver Side Inner Guard and the compliance plate is located on the Pass Side Lower A-Pillar. An example VIN number would be similar to SCBBN63Y4HC015100.