The 2012 1 Series BMW
20i is a rear-wheel drive two-door coupe that was released to the Australian market on 244th September 2011
classified as a E82 MY12. The BMW 1 Series is regarded as a 2d coupe built in Germany with prices from a dealer as a used car starting at $19,000.
The BMW 1 Series is a rear-wheel drive 2 door with 4 seats, powered by a 2.0L INLINE 4 engine that has 115 kW of power (at 6400 rpm) and 200 Nm of torque (at 3600 rpm) via a Six-speed Manual. BMW claims the 1 Series 20i uses 7.9L/100km of Premium Unleaded Petrol in the combined city and highway cycle while putting out 189g of CO2. It has a 53L fuel tank, meaning it should be able to travel 671km per full tank.
The BMW 1 Series measures 1423mm (56.0 inches) in height, 4360mm (171.7 inches) in length, 1748mm (68.8 inches) in width with a 2660mm (104.7 inches) wheelbase that brings about a total of 1320kg (2910.1 lbs) of unladen weight. The 1 Series 20i comes standard with 205/50 R17 front tyres and 205/50 R17 rear tyres. It requires a service every 24 months or 25,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.
The 2012 BMW 1 Series 20i has a 120mm ground clearance with a 1200kg braked and 680kg unbraked towing capacity. It has a final gear ratio of 3.64.
The BMW 1 Series has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Inner Guard and the compliance plate is located on the Pass Side Lower B-Pillar. An example VIN number would be similar to WBAUN520%VF123456.
