The 2020 4 Series BMW
20i LUXURY LINE is a rear-wheel drive two-door convertible that was released to the Australian market on 1st January 2018
classified as a F33 MY18. The BMW 4 Series is regarded as a 2d convertible built in Germany with prices from a dealer as a used car starting at $48,500.
The BMW 4 Series is a rear-wheel drive 2 door with 4 seats, powered by a 2.0L TURBO 4 engine that has 135 kW of power (at 5000 rpm) and 270 Nm of torque (at 1250 rpm) via an Eight-speed Automatic. BMW claims the 4 Series 20i LUXURY LINE uses 6.2L/100km of Premium Unleaded Petrol in the combined city and highway cycle while putting out 144g of CO2. It has a 57L fuel tank, meaning it should be able to travel 919km per full tank.
The BMW 4 Series measures 1377mm (54.2 inches) in height, 4638mm (182.6 inches) in length, 1825mm (71.9 inches) in width with a 2810mm (110.6 inches) wheelbase that brings about a total of 1662kg (3664.1 lbs) of unladen weight. The 4 Series 20i LUXURY LINE comes standard with 225/40 R19 front tyres and 255/35 R19 rear tyres. It requires a service every 24 months or 25,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.
The 2020 BMW 4 Series 20i LUXURY LINE has a 130mm ground clearance with a 1400kg braked and 695kg unbraked towing capacity. It has a final gear ratio of 3.08.
The VIN number can be found on the Driver Side Inner Guard and the compliance plate is located on the Pass Side Lower B-Pillar. An example VIN number would be similar to WBA4T320%05C20500.
