The 2020 Ford Endura ST-LINE (AWD) is an all-wheel drive four-door wagon that was released to the Australian market on 61st March 2020
classified as a CA MY20. The Ford Endura is regarded as a 4d wagon built in Canada with prices from a dealer as a used car starting at $28,200.
The Ford Endura is an all-wheel drive 4 door with 5 seats, powered by a 2.0L DIESEL TURBO 4 engine that has 140 kW of power (at 3500 rpm) and 400 Nm of torque (at 2000 rpm) via an Eight-speed Automatic. Ford claims the Endura ST-LINE (AWD) uses 6.7L/100km of Diesel in the combined city and highway cycle while putting out 176g of CO2. It has a 64L fuel tank, meaning it should be able to travel 955km per full tank.
The Ford Endura measures 1751mm (68.9 inches) in height, 4834mm (190.3 inches) in length, 1928mm (75.9 inches) in width with a 2849mm (112.2 inches) wheelbase that brings about a total of 2066kg (4554.7 lbs) of unladen weight. The Endura ST-LINE (AWD) comes standard with 245/50 R20 front tyres and 245/50 R20 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.
The 2020 Ford Endura ST-LINE (AWD) has a 207mm ground clearance with a 2000kg braked and 750kg unbraked towing capacity.
The Ford Endura has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Pass Side Lower B-Pillar. An example VIN number would be similar to 2FMTK%AA$AB123456.
