1. Home
    2. Research
    3. Hyundai
    4. i30
    5. 2015
    6. Price & Specs
    7. TOURER 1.6 GDi
    Hyundai i30

    2015 Hyundai i30 Tourer 1.6 Gdi Pricing and Spec

    From

    $12,600

    excl. on-roads

    Overview

    The 2015 Hyundai I30 TOURER 1.6 GDi is a front wheel drive 4 Door Wagon that was released to the Australian market on 6th January 2015 classified as a GDe3 SERIES 2. The Hyundai I30 is regarded as a small built in Czech Republic with prices from a dealer as a used car starting at $12,600.

    The Hyundai I30 is a front wheel drive 4 door with 5 seats, powered by a 1.6L Inline 4 Cylinder engine that has 98 kW of power (at 6300 rpm) and 163 Nm of torque (at 4850 rpm) via a 7 Speed Auto Dual Clutch. Hyundai claims the i30 TOURER 1.6 GDi uses 6.0L/100km of unleaded petrol in the combined city and highway cycle while putting out 160g of CO2. It has a 53L fuel tank, meaning it should be able to travel 883km per full tank.

    The Hyundai I30 measures 1500mm (59.1 inches) in height, 4485mm (176.6 inches) in length, 1780mm (70.1 inches) in width with a 2650mm (104.3 inches) wheelbase that brings about a total of 1355kg (2987.3 lbs) of unladen weight. The i30 TOURER 1.6 GDi comes standard with 205/55 R16 front tyres and 205/55 R16 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 60 month, unlimited kilometre warranty.

    The 2015 Hyundai I30 TOURER 1.6 GDi has a 140mm ground clearance with a 1400kg braked and 600kg unbraked towing capacity. It has a final gear ratio of 3.650.

    The Hyundai I30 has received a 5 star rating from ANCAP. The VIN number can be found on the Under Driver Seat On Floor and the compliance plate is located on the Pass Side Lower A-Pillar. An example VIN number would be similar to TMAD181CLBJ123456.

    Best For
    City driving
    Fun
    Warranty
    5Years
    or
    unlimited km
    ANCAP Safety Rating
    Fuel Efficiency
    53 L883 km
    4 Door Wagon
    petrol
    1.6L
    FWD
    7 AT
    5
    4

    Pros

    • Myriad variants to choose from
    • Well-sorted ride and handling
    • N versions are proper dynamos

    Cons

    • Too much tyre noise
    • 1.6 turbo's shorter service intervals
    • N Line hatches lose some driver-assist features

    Dimensions

    1500mm
    1780mm
    4485mm

    The dimensions shown above are for the base model.

    Specifications

    TypeMulti Point Fuel Injection
    Size (cc)1591
    Size (L)-
    InductionInline 4 Cylinder
    CamshaftVARIABLE DOUBLE OVERHEAD CAM
    Valves/Ports per Cylinder16
    Power98kW
    Power RPM6300
    Torque163Nm
    Torque RPM4850
    Bore Stroke77.3x85.44
    Compression Ratio11.00

    Transmission7 Speed Auto Dual Clutch
    Final Gear Ratio3.650
    Suspension Frontanti roll bar, coil spring, gas damper, macpherson strut
    Suspension Rearanti roll bar, multi-link system, coil spring, gas damper
    Steering MechanismRACK & PINION - POWER ASSISTED
    DriveFWD

    Fuel Combined (L/100km)6.0
    Fuel Urban (L/100km)-
    Fuel Extra Urban (L/100km)-
    Tank Size (L)53
    Fuel Typeunleaded petrol
    e10 Compatible-
    CO2 Combined160
    CO2 Urban-
    CO2 Extra Urban-

    Brake FrontDISC - VENTILATED
    Brake RearDISC
    Tyre Front205/55 R16
    Tyre Rear205/55 R16
    Front Rim Size6.5x16
    Rear Rim Size6.5x16

    Vehicle Height (mm)1500
    Vehicle Length (mm)4485
    Vehicle Width (mm)1780
    Ground Clearance (mm)140
    Wheelbase (mm)2650
    Turning Circle (m)10.0
    Unladen Weight (kg)1355
    Gross Combined Weight (kg)-
    Gross Vehicle Weight (kg)-
    Track Front-
    Track Rear-
    Towing Capacity Brake (kg)1400
    Towing Capacity Unbraked (kg)600

    Compliance Plate LocationPass Side Lower A-Pillar
    Country Of OriginCzech Republic
    Number of Doors4
    Seats5
    Service Interval KMs15
    Service Interval Months12
    VIN LocationUnder Driver Seat On Floor
    VIN NumberTMAD181CLBJ123456
    Warranty KMs999
    Warranty Months60
    Discontinued Date31/01/2016

    ANCAP Rating5
    Euro Air Pollution Standard-