The 2018 Hyundai iLoad 3S LIFTBACK is a rear-wheel drive four-door van that was released to the Australian market on 121st May 2018
classified as a TQ4 MY19. The Hyundai iLoad is regarded as a 4d van built in Korea with prices from a dealer as a used car starting at $23,100.
The Hyundai iLoad is a rear-wheel drive 4 door with 3 seats, powered by a 2.5L DIESEL TURBO 4 engine that has 100 kW of power (at 3800 rpm) and 343 Nm of torque (at 1500 rpm) via a Six-speed Manual. Hyundai claims the iLoad 3S LIFTBACK uses 7.6L/100km of Diesel in the combined city and highway cycle while putting out 199g of CO2. It has a 75L fuel tank, meaning it should be able to travel 987km per full tank.
The Hyundai iLoad measures 1935mm (76.2 inches) in height, 5125mm (201.8 inches) in length, 1920mm (75.6 inches) in width with a 3200mm (126.0 inches) wheelbase that brings about a total of 2084kg (4594.4 lbs) of unladen weight. The iLoad 3S LIFTBACK comes standard with 215/70 R16 front tyres and 215/70 R16 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 60 month, 160km warranty.
The 2018 Hyundai iLoad 3S LIFTBACK has a 190mm ground clearance with a 2000kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 3.692.
The Hyundai iLoad has received a 4 star rating from ANCAP. The VIN number can be found on the Pass Side Front Floor and the compliance plate is located on the Lower Pass Side B-Pillar. An example VIN number would be similar to KMFWBH7JR8U123456.
