2019 Infiniti Q70 3.5 HYBRID GT PREMIUM Pricing and Spec
From
$36,800
excl. on-roads
Overview
The 2019 Infiniti Q70 3.5 HYBRID GT PREMIUM is a rear-wheel drive four-door sedan that was released to the Australian market on 32nd February 2016 classified as a MY16. The Infiniti Q70 is regarded as a 4d sedan built in Japan with prices from a dealer as a used car starting at $36,800.
The Infiniti Q70 is a rear-wheel drive 4 door with 5 seats, powered by a 3.5L V6 engine that has 225 kW of power (at 6800 rpm) and 350 Nm of torque (at 5000 rpm) via a Seven-speed Automatic. Infiniti claims the Q70 3.5 HYBRID GT PREMIUM uses 6.9L/100km of Premium Unleaded-Electric Hybrid in the combined city and highway cycle while putting out 159g of CO2. It has a 70L fuel tank, meaning it should be able to travel 1014km per full tank.
The Infiniti Q70 measures 1500mm (59.1 inches) in height, 4945mm (194.7 inches) in length, 1845mm (72.6 inches) in width with a 2900mm (114.2 inches) wheelbase that brings about a total of 1785kg (3935.2 lbs) of unladen weight. The Q70 3.5 HYBRID GT PREMIUM comes standard with 245/50 R18 front tyres and 245/50 R18 rear tyres. It requires a service every 12 months or 20,000 km, whichever comes first. It has a 48 month, 100km warranty.
The 2019 Infiniti Q70 3.5 HYBRID GT PREMIUM has a 151mm ground clearance with a 1500kg braked and 750kg unbraked towing capacity.
The VIN number can be found on the Driver Side Eng Scuttle and the compliance plate is located on the Lower Pass Side B-Pillar. An example VIN number would be similar to JN1B#AY51A0123456.
Dimensions
The dimensions shown above are for the base model.
Specifications
| Type | MULTI POINT F/INJ |
|---|---|
| Size (cc) | 3498 |
| Size (L) | 3.5L |
| Induction | V6 |
| Camshaft | DUAL OVERHEAD CAM |
| Valves/Ports per Cylinder | 24 |
| Power | 225kW |
| Power RPM | 6800 |
| Torque | 350Nm |
| Torque RPM | 5000 |
| Bore Stroke | - |
| Compression Ratio | 10.6 |
| Transmission | 7 SP AUTOMATIC |
|---|---|
| Final Gear Ratio | 0 |
| Suspension Front | - |
| Suspension Rear | - |
| Steering Mechanism | RACK & PINION - POWER ASSISTED |
| Drive | REAR WHEEL DRIVE |
| Fuel Combined (L/100km) | 6.9 |
|---|---|
| Fuel Urban (L/100km) | 0 |
| Fuel Extra Urban (L/100km) | 0 |
| Tank Size (L) | 70 |
| Fuel Type | PREMIUM UNLEADED/ELECTRIC |
| e10 Compatible | unknown |
| CO2 Combined | 159 |
| CO2 Urban | - |
| CO2 Extra Urban | - |
| Brake Front | DISC - VENTILATED |
|---|---|
| Brake Rear | DISC - VENTILATED |
| Tyre Front | 245/50 R18 |
| Tyre Rear | 245/50 R18 |
| Front Rim Size | 8x18 |
| Rear Rim Size | 8x18 |
| Vehicle Height (mm) | 1500 |
|---|---|
| Vehicle Length (mm) | 4945 |
| Vehicle Width (mm) | 1845 |
| Ground Clearance (mm) | 151 |
| Wheelbase (mm) | 2900 |
| Turning Circle (m) | 11.2 |
| Unladen Weight (kg) | 1785 |
| Gross Combined Weight (kg) | 0 |
| Gross Vehicle Weight (kg) | 2400 |
| Track Front | - |
| Track Rear | - |
| Towing Capacity Brake (kg) | 1500 |
| Towing Capacity Unbraked (kg) | 750 |
| Compliance Plate Location | Lower Pass Side B-Pillar |
|---|---|
| Country Of Origin | JAPAN |
| Number of Doors | 4 |
| Seats | 5 |
| Service Interval KMs | 20 |
| Service Interval Months | 12 |
| VIN Location | Driver Side Eng Scuttle |
| VIN Number | JN1B#AY51A0123456 |
| Warranty KMs | 100 |
| Warranty Months | 48 |
| Discontinued Date | 2020-10-31 |
| ANCAP Rating | - |
|---|---|
| Euro Air Pollution Standard | - |