The 2013 Cherokee Jeep
JET is a four-wheel drive four-door wagon that was released to the Australian market on 214th August 2012
classified as a KK MY12. The Jeep Cherokee is regarded as a 4d wagon built in United States Of America with prices from a dealer as a used car starting at $14,100.
The Jeep Cherokee is a four-wheel drive 4 door with 5 seats, powered by a 3.7L V6 engine that has 151 kW of power (at 5200 rpm) and 314 Nm of torque (at 4000 rpm) via a Four-speed Automatic. Jeep claims the Cherokee JET uses 12.4L/100km of Unleaded Petrol in the combined city and highway cycle while putting out 293g of CO2. It has a 73L fuel tank, meaning it should be able to travel 589km per full tank.
The Jeep Cherokee measures 1797mm (70.7 inches) in height, 4493mm (176.9 inches) in length, 1839mm (72.4 inches) in width with a 2694mm (106.1 inches) wheelbase that brings about a total of 2040kg (4497.4 lbs) of unladen weight. The Cherokee JET comes standard with 245/50 R20 front tyres and 245/50 R20 rear tyres. It requires a service every 6 months or 12,000 km, whichever comes first. It has a 36 month, 100km warranty.
The 2013 Jeep Cherokee JET has a 196mm ground clearance with a 2270kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 3.73.
The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to 1J8G458K*%W123466.
