The 2019 Kia Stinger
200Si is a rear wheel drive 4 Door Sedan that was released to the Australian market on 8th January 2018
classified as a CK MY19. The Kia Stinger is regarded as a large built in Korea with prices from a dealer as a used car starting at $32,400.
The Kia Stinger is a rear wheel drive 4 door with 5 seats, powered by a 2.0L Turbo 4 Cylinder engine that has 182 kW of power (at 6200 rpm) and 353 Nm of torque (at 1400 rpm) via a 8 Speed Automatic. Kia claims the Stinger 200Si uses 8.8L/100km of unleaded petrol in the combined city and highway cycle while putting out 201g of CO2. It has a 60L fuel tank, meaning it should be able to travel 682km per full tank.
The Kia Stinger measures 1400mm (55.1 inches) in height, 4830mm (190.2 inches) in length, 1870mm (73.6 inches) in width with a 2905mm (114.4 inches) wheelbase that brings about a total of 1693kg (3732.4 lbs) of unladen weight. The Stinger 200Si comes standard with 225/45 R18 front tyres and 225/45 R18 rear tyres. It requires a service every 12 months or 10,000 km, whichever comes first. It has a 84 month, unlimited kilometre warranty.
The 2019 Kia Stinger 200Si has a 130mm ground clearance with a 1500kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 3.727.
The Kia Stinger has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the LHS - Lower Door Aperture. An example VIN number would be similar to KNAE*51AM*6123456.
