2012 Land Rover Defender 110 HCPU (4x4) Pricing and Spec

The 2012 Land Rover Defender 110 HCPU (4x4) is a four-wheel drive P/UP that was released to the Australian market on 1st January 2011 classified as a MY11. The Land Rover Defender is regarded as a p/up built in United Kingdom with prices from a dealer as a used car starting at $21,800.

The Land Rover Defender is a four-wheel drive 2 door with 2 seats, powered by a 2.4L DIESEL TURBO 4 engine that has 90 kW of power (at 3500 rpm) and 360 Nm of torque (at 2000 rpm) via a Six-speed Manual. Land Rover claims the Defender 110 HCPU (4x4) uses 11.1L/100km of Diesel in the combined city and highway cycle while putting out 295g of CO₂. It has a 75L fuel tank, meaning it should be able to travel 676km per full tank.

The Land Rover Defender measures 2021mm (79.6 inches) in height, 4439mm (174.8 inches) in length, 1790mm (70.5 inches) in width with a 2794mm (110.0 inches) wheelbase that brings about a total of 1660kg (3659.7 lbs) of unladen weight. The Defender 110 HCPU (4x4) comes standard with 7.5 R16 front tyres and 7.5 R16 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 36 month, 100km warranty.

The 2012 Land Rover Defender 110 HCPU (4x4) has a 215mm ground clearance with a 3000kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 3.54.

The VIN number can be found on the Front Driver Side Chassis and the compliance plate is located on the Pass Side On B-Pillar. An example VIN number would be similar to SALLDDKS78A123456.