The 2020 CX-3 Mazda
AKARI (AWD) is an all-wheel drive four-door wagon that was released to the Australian market on 213th August 2018
classified as a DK MY19. The Mazda CX-3 is regarded as a 4d wagon built in Japan with prices from a dealer as a used car starting at $30,200.
The Mazda CX-3 is an all-wheel drive 4 door with 5 seats, powered by a 1.8L DIESEL TURBO 4 engine that has 85 kW of power (at 4000 rpm) and 270 Nm of torque (at 1600 rpm) via a Six-speed Automatic. Mazda claims the CX-3 AKARI (AWD) uses 5.1L/100km of Diesel in the combined city and highway cycle while putting out 133g of CO2. It has a 44L fuel tank, meaning it should be able to travel 863km per full tank.
The Mazda CX-3 measures 1535mm (60.4 inches) in height, 4275mm (168.3 inches) in length, 1765mm (69.5 inches) in width with a 2570mm (101.2 inches) wheelbase that brings about a total of 1421kg (3132.8 lbs) of unladen weight. The CX-3 AKARI (AWD) comes standard with 215/50 R18 front tyres and 215/50 R18 rear tyres. It requires a service every 12 months or 10,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.
The 2020 Mazda CX-3 AKARI (AWD) has a 160mm ground clearance with a 800kg braked and 640kg unbraked towing capacity. It has a final gear ratio of 4.325.
The Mazda CX-3 has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to MM0DK4W8A0W123456.
