1. Home
    2. Research
    3. Mazda
    4. Mazda 3
    5. 2013
    6. Price & Specs
    7. SP25 GT
    Mazda 3

    2013 Mazda 3 Sp25 Gt Pricing and Spec

    From

    $16,000

    excl. on-roads

    Overview

    The 2013 Mazda Mazda3 SP25 GT is a front wheel drive 4 Door Sedan that was released to the Australian market on 9th January 2013 classified as a BM. The Mazda Mazda3 is regarded as a small built in Japan with prices from a dealer as a used car starting at $16,000.

    The Mazda Mazda3 is a front wheel drive 4 door with 5 seats, powered by a 2.5L Inline 4 Cylinder engine that has 138 kW of power (at 5700 rpm) and 250 Nm of torque (at 3250 rpm) via a 6 Speed Automatic. Mazda claims the Mazda 3 SP25 GT uses 6.0L/100km of unleaded petrol in the combined city and highway cycle while putting out 141g of CO2. It has a 51L fuel tank, meaning it should be able to travel 850km per full tank.

    The Mazda Mazda3 measures 1455mm (57.3 inches) in height, 4580mm (180.3 inches) in length, 1795mm (70.7 inches) in width with a 2700mm (106.3 inches) wheelbase that brings about a total of 1351kg (2978.4 lbs) of unladen weight. The Mazda 3 SP25 GT comes standard with 215/45 R18 front tyres and 215/45 R18 rear tyres. It requires a service every 12 months or 10,000 km, whichever comes first. It has a 36 month, 100km warranty.

    The 2013 Mazda Mazda3 SP25 GT has a 155mm ground clearance with a 1200kg braked and 600kg unbraked towing capacity. It has a final gear ratio of 3.812.

    The Mazda Mazda3 has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to JM0BM527810123456.

    Best For
    City driving
    Warranty
    3Years
    or
    100,000km
    ANCAP Safety Rating
    Fuel Efficiency
    51 L850 km
    4 Door Sedan
    petrol
    2.5L
    FWD
    6 AT
    5
    4

    Pros

    • Loads of style
    • Upmarket ambience
    • Packed full of gear

    Cons

    • Pricey to buy and service
    • Lacks turbocharging
    • Could benefit from tamer ride quality

    Dimensions

    1455mm
    1795mm
    4580mm

    The dimensions shown above are for the base model.

    Specifications

    TypeMulti Point Fuel Injection
    Size (cc)2488
    Size (L)-
    InductionInline 4 Cylinder
    CamshaftVARIABLE DOUBLE OVERHEAD CAM
    Valves/Ports per Cylinder16
    Power138kW
    Power RPM5700
    Torque250Nm
    Torque RPM3250
    Bore Stroke89x100
    Compression Ratio13.00

    Transmission6 Speed Automatic
    Final Gear Ratio3.812
    Suspension Frontanti roll bar, coil spring, gas damper, macpherson strut
    Suspension Rearanti roll bar, multi-link system, coil spring, gas damper
    Steering MechanismRACK & PINION - POWER ASSISTED
    DriveFWD

    Fuel Combined (L/100km)6.0
    Fuel Urban (L/100km)8.0
    Fuel Extra Urban (L/100km)4.9
    Tank Size (L)51
    Fuel Typeunleaded petrol
    e10 Compatible-
    CO2 Combined141
    CO2 Urban187
    CO2 Extra Urban114

    Brake FrontDISC - VENTILATED
    Brake RearDISC
    Tyre Front215/45 R18
    Tyre Rear215/45 R18
    Front Rim Size7x18
    Rear Rim Size7x18

    Vehicle Height (mm)1455
    Vehicle Length (mm)4580
    Vehicle Width (mm)1795
    Ground Clearance (mm)155
    Wheelbase (mm)2700
    Turning Circle (m)10.5
    Unladen Weight (kg)1351
    Gross Combined Weight (kg)-
    Gross Vehicle Weight (kg)-
    Track Front-
    Track Rear-
    Towing Capacity Brake (kg)1200
    Towing Capacity Unbraked (kg)600

    Compliance Plate LocationLower Pass Side Centre Pillar
    Country Of OriginJapan
    Number of Doors4
    Seats5
    Service Interval KMs10
    Service Interval Months12
    VIN LocationDriver Side Front Floor
    VIN NumberJM0BM527810123456
    Warranty KMs100
    Warranty Months36
    Discontinued Date31/01/2015

    ANCAP Rating5
    Euro Air Pollution StandardEuro 5