1. Home
    2. Research
    3. Mazda
    4. Mazda 3
    5. 2017
    6. Price & Specs
    7. NEO
    Mazda 3

    2017 Mazda 3 Neo Pricing and Spec

    From

    $15,800

    excl. on-roads

    Overview

    The 2017 Mazda Mazda3 NEO is a front wheel drive 5 Door Hatchback that was released to the Australian market on 7th January 2016 classified as a BN MY17. The Mazda Mazda3 is regarded as a small built in Japan with prices from a dealer as a used car starting at $15,800.

    The Mazda Mazda3 is a front wheel drive 5 door with 5 seats, powered by a 2.0L Inline 4 Cylinder engine that has 114 kW of power (at 6000 rpm) and 200 Nm of torque (at 4000 rpm) via a 6 Speed Automatic. Mazda claims the Mazda 3 NEO uses 5.8L/100km of unleaded petrol in the combined city and highway cycle while putting out 136g of CO2. It has a 51L fuel tank, meaning it should be able to travel 879km per full tank.

    The Mazda Mazda3 measures 1450mm (57.1 inches) in height, 4460mm (175.6 inches) in length, 1795mm (70.7 inches) in width with a 2700mm (106.3 inches) wheelbase that brings about a total of 1296kg (2857.2 lbs) of unladen weight. The Mazda 3 NEO comes standard with 205/60 R16 front tyres and 205/60 R16 rear tyres. It requires a service every 12 months or 10,000 km, whichever comes first. It has a 36 month, unlimited kilometre warranty.

    The 2017 Mazda Mazda3 NEO has a 155mm ground clearance with a 1200kg braked and 600kg unbraked towing capacity. It has a final gear ratio of 3.812.

    The Mazda Mazda3 has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to JM0BM547810123456.

    Best For
    City driving
    Warranty
    3Years
    or
    unlimited km
    ANCAP Safety Rating
    Fuel Efficiency
    51 L879 km
    5 Door Hatchback
    petrol
    2.0L
    FWD
    6 AT
    5
    5

    Pros

    • Loads of style
    • Upmarket ambience
    • Packed full of gear

    Cons

    • Pricey to buy and service
    • Lacks turbocharging
    • Could benefit from tamer ride quality

    Dimensions

    1450mm
    1795mm
    4460mm

    The dimensions shown above are for the base model.

    Specifications

    TypeGasoline Direct Injection
    Size (cc)1998
    Size (L)-
    InductionInline 4 Cylinder
    CamshaftVARIABLE DOUBLE OVERHEAD CAM
    Valves/Ports per Cylinder16
    Power114kW
    Power RPM6000
    Torque200Nm
    Torque RPM4000
    Bore Stroke83.5x91.2
    Compression Ratio13.00

    Transmission6 Speed Automatic
    Final Gear Ratio3.812
    Suspension Frontanti roll bar, coil spring, gas damper, macpherson strut
    Suspension Rearanti roll bar, multi-link system, coil spring, gas damper
    Steering MechanismRACK & PINION - POWER ASSISTED
    DriveFWD

    Fuel Combined (L/100km)5.8
    Fuel Urban (L/100km)7.5
    Fuel Extra Urban (L/100km)4.8
    Tank Size (L)51
    Fuel Typeunleaded petrol
    e10 Compatible-
    CO2 Combined136
    CO2 Urban176
    CO2 Extra Urban112

    Brake FrontDISC - VENTILATED
    Brake RearDISC
    Tyre Front205/60 R16
    Tyre Rear205/60 R16
    Front Rim Size6.5x16
    Rear Rim Size6.5x16

    Vehicle Height (mm)1450
    Vehicle Length (mm)4460
    Vehicle Width (mm)1795
    Ground Clearance (mm)155
    Wheelbase (mm)2700
    Turning Circle (m)10.6
    Unladen Weight (kg)1296
    Gross Combined Weight (kg)-
    Gross Vehicle Weight (kg)-
    Track Front-
    Track Rear-
    Towing Capacity Brake (kg)1200
    Towing Capacity Unbraked (kg)600

    Compliance Plate LocationLower Pass Side Centre Pillar
    Country Of OriginJapan
    Number of Doors5
    Seats5
    Service Interval KMs10
    Service Interval Months12
    VIN LocationDriver Side Front Floor
    VIN NumberJM0BM547810123456
    Warranty KMs999
    Warranty Months36
    Discontinued Date28/02/2018

    ANCAP Rating5
    Euro Air Pollution StandardEuro 5

    Compare to...

    Other Mazda Mazda3s