The 2018 Mazda 3 Mazda
SP25 ASTINA is a front-wheel drive five-door hatchback that was released to the Australian market on 32nd February 2018
classified as a BN MY18. The Mazda Mazda 3 is regarded as a 5d hatchback built in Japan with prices from a dealer as a used car starting at $22,900.
The Mazda Mazda 3 is a front-wheel drive 5 door with 5 seats, powered by a 2.5L INLINE 4 engine that has 138 kW of power (at 5700 rpm) and 250 Nm of torque (at 3250 rpm) via a Six-speed Manual. Mazda claims the Mazda 3 SP25 ASTINA uses 6.5L/100km of Unleaded Petrol in the combined city and highway cycle while putting out 153g of CO2. It has a 51L fuel tank, meaning it should be able to travel 785km per full tank.
The Mazda Mazda 3 measures 1470mm (57.9 inches) in height, 4460mm (175.6 inches) in length, 1795mm (70.7 inches) in width with a 2700mm (106.3 inches) wheelbase that brings about a total of 1373kg (3026.9 lbs) of unladen weight. The Mazda 3 SP25 ASTINA comes standard with 215/45 R18 front tyres and 215/45 R18 rear tyres. It requires a service every 12 months or 10,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.
The 2018 Mazda Mazda 3 SP25 ASTINA has a 155mm ground clearance with a 1200kg braked and 600kg unbraked towing capacity. It has a final gear ratio of 4.105.
The Mazda Mazda 3 has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to JM0BM547810123456.
