The 2018 Mazda 3 Mazda
TOURING is a front-wheel drive four-door sedan that was released to the Australian market on 32nd February 2018
classified as a BN MY18. The Mazda Mazda 3 is regarded as a 4d sedan built in Japan with prices from a dealer as a used car starting at $16,800.
The Mazda Mazda 3 is a front-wheel drive 4 door with 5 seats, powered by a 2.0L INLINE 4 engine that has 114 kW of power (at 6000 rpm) and 200 Nm of torque (at 4000 rpm) via a Six-speed Manual. Mazda claims the Mazda 3 TOURING uses 5.8L/100km of Unleaded Petrol in the combined city and highway cycle while putting out 136g of CO2. It has a 51L fuel tank, meaning it should be able to travel 879km per full tank.
The Mazda Mazda 3 measures 1455mm (57.3 inches) in height, 4580mm (180.3 inches) in length, 1795mm (70.7 inches) in width with a 2700mm (106.3 inches) wheelbase that brings about a total of 1300kg (2866.0 lbs) of unladen weight. The Mazda 3 TOURING comes standard with 205/60 R16 front tyres and 205/60 R16 rear tyres. It requires a service every 12 months or 10,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.
The 2018 Mazda Mazda 3 TOURING has a 155mm ground clearance with a 1200kg braked and 600kg unbraked towing capacity. It has a final gear ratio of 4.105.
The Mazda Mazda 3 has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to JM0BM527810123456.
