1. Home
    2. Research
    3. Mazda
    4. Mazda 3
    5. 2019
    6. Price & Specs
    7. G20 TOURING VISION
    Mazda 3

    2019 Mazda 3 G20 Touring Vision Pricing and Spec

    From

    $24,700

    excl. on-roads

    Overview

    The 2019 Mazda Mazda3 G20 TOURING VISION is a front wheel drive 5 Door Hatchback that was released to the Australian market on 2nd January 2019 classified as a BP. The Mazda Mazda3 is regarded as a small built in Japan with prices from a dealer as a used car starting at $24,700.

    The Mazda Mazda3 is a front wheel drive 5 door with 5 seats, powered by a 2.0L Inline 4 Cylinder engine that has 114 kW of power (at 6000 rpm) and 200 Nm of torque (at 4000 rpm) via a 6 Speed Manual. Mazda claims the Mazda 3 G20 TOURING VISION uses 6.2L/100km of unleaded petrol in the combined city and highway cycle while putting out 151g of CO2. It has a 51L fuel tank, meaning it should be able to travel 823km per full tank.

    The Mazda Mazda3 measures 1440mm (56.7 inches) in height, 1435mm (56.5 inches) in length, 1795mm (70.7 inches) in width with a 2725mm (107.3 inches) wheelbase that brings about a total of 1317kg (2903.5 lbs) of unladen weight. The Mazda 3 G20 TOURING VISION comes standard with 215/45 R18 89W front tyres and 215/45 R18 89W rear tyres. It requires a service every 12 months or 10,000 km, whichever comes first. It has a 60 month, unlimited kilometre warranty.

    The 2019 Mazda Mazda3 G20 TOURING VISION has a 150mm ground clearance with a 1200kg braked and 600kg unbraked towing capacity. It has a final gear ratio of 4.105.

    The Mazda Mazda3 has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to JM0BP2H7601123456.

    Best For
    City driving
    Warranty
    5Years
    or
    unlimited km
    ANCAP Safety Rating
    Fuel Efficiency
    51 L823 km
    5 Door Hatchback
    petrol
    2.0L
    FWD
    6 MT
    5
    5

    Pros

    • Loads of style
    • Upmarket ambience
    • Packed full of gear

    Cons

    • Pricey to buy and service
    • Lacks turbocharging
    • Could benefit from tamer ride quality

    Dimensions

    1440mm
    1795mm
    1435mm

    The dimensions shown above are for the base model.

    Specifications

    TypeDirect Fuel Injection
    Size (cc)1999
    Size (L)-
    InductionInline 4 Cylinder
    CamshaftVARIABLE DOUBLE OVERHEAD CAM
    Valves/Ports per Cylinder16
    Power114kW
    Power RPM6000
    Torque200Nm
    Torque RPM4000
    Bore Stroke83.5x91.5
    Compression Ratio13.00

    Transmission6 Speed Manual
    Final Gear Ratio4.105
    Suspension Frontmacpherson strut
    Suspension Reartorsion beam
    Steering MechanismRACK & PINION - POWER ASSISTED
    DriveFWD

    Fuel Combined (L/100km)6.2
    Fuel Urban (L/100km)8.2
    Fuel Extra Urban (L/100km)5.4
    Tank Size (L)51
    Fuel Typeunleaded petrol
    e10 Compatibleyes
    CO2 Combined151
    CO2 Urban-
    CO2 Extra Urban-

    Brake FrontDISC - VENTILATED
    Brake RearDISC
    Tyre Front215/45 R18 89W
    Tyre Rear215/45 R18 89W
    Front Rim Size7x18
    Rear Rim Size7x18

    Vehicle Height (mm)1440
    Vehicle Length (mm)1435
    Vehicle Width (mm)1795
    Ground Clearance (mm)150
    Wheelbase (mm)2725
    Turning Circle (m)10.6
    Unladen Weight (kg)1317
    Gross Combined Weight (kg)-
    Gross Vehicle Weight (kg)-
    Track Front-
    Track Rear-
    Towing Capacity Brake (kg)1200
    Towing Capacity Unbraked (kg)600

    Compliance Plate LocationLower Pass Side Centre Pillar
    Country Of OriginJapan
    Number of Doors5
    Seats5
    Service Interval KMs10
    Service Interval Months12
    VIN LocationDriver Side Front Floor
    VIN NumberJM0BP2H7601123456
    Warranty KMs999
    Warranty Months60
    Discontinued Date31/10/2021

    ANCAP Rating5
    Euro Air Pollution StandardEURO 5