The 2019 Mazda 3 Mazda
G25 ASTINA is a front-wheel drive five-door hatchback that was released to the Australian market on 32nd February 2019
classified as a BP. The Mazda Mazda 3 is regarded as a 5d hatchback built in Japan with prices from a dealer as a used car starting at $29,400.
The Mazda Mazda 3 is a front-wheel drive 5 door with 5 seats, powered by a 2.5L INLINE 4 engine that has 139 kW of power (at 6000 rpm) and 252 Nm of torque (at 4000 rpm) via a Six-speed Manual. Mazda claims the Mazda 3 G25 ASTINA uses 6.3L/100km of Unleaded Petrol in the combined city and highway cycle while putting out 146g of CO2. It has a 51L fuel tank, meaning it should be able to travel 810km per full tank.
The Mazda Mazda 3 measures 1440mm (56.7 inches) in height, 1435mm (56.5 inches) in length, 1795mm (70.7 inches) in width with a 2725mm (107.3 inches) wheelbase that brings about a total of 1351kg (2978.4 lbs) of unladen weight. The Mazda 3 G25 ASTINA comes standard with 215/45 R18 89W front tyres and 215/45 R18 89W rear tyres. It requires a service every 12 months or 10,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.
The 2019 Mazda Mazda 3 G25 ASTINA has a 150mm ground clearance with a 1200kg braked and 600kg unbraked towing capacity. It has a final gear ratio of 4.105.
The Mazda Mazda 3 has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to JM0BP2HL601123456.
