Overview
The 2019 Mazda Mazda3 G25 GT VISION is a front wheel drive 4 Door Sedan that was released to the Australian market on 2nd January 2019 classified as a BP. The Mazda Mazda3 is regarded as a small built in Japan with prices from a dealer as a used car starting at $28,200.
The Mazda Mazda3 is a front wheel drive 4 door with 5 seats, powered by a 2.5L Inline 4 Cylinder engine that has 139 kW of power (at 6000 rpm) and 252 Nm of torque (at 4000 rpm) via a 6 Speed Manual. Mazda claims the Mazda 3 G25 GT VISION uses 6.3L/100km of unleaded petrol in the combined city and highway cycle while putting out 146g of CO2. It has a 51L fuel tank, meaning it should be able to travel 810km per full tank.
The Mazda Mazda3 measures 1440mm (56.7 inches) in height, 1435mm (56.5 inches) in length, 1795mm (70.7 inches) in width with a 2725mm (107.3 inches) wheelbase that brings about a total of 1339kg (2952.0 lbs) of unladen weight. The Mazda 3 G25 GT VISION comes standard with 215/45 R18 89W front tyres and 215/45 R18 89W rear tyres. It requires a service every 12 months or 10,000 km, whichever comes first. It has a 60 month, unlimited kilometre warranty.
The 2019 Mazda Mazda3 G25 GT VISION has a 150mm ground clearance with a 1200kg braked and 600kg unbraked towing capacity. It has a final gear ratio of 4.105.
The Mazda Mazda3 has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to JM0BP2HL601123456.
Pros
- Loads of style
- Upmarket ambience
- Packed full of gear
Cons
- Pricey to buy and service
- Lacks turbocharging
- Could benefit from tamer ride quality
Dimensions
The dimensions shown above are for the base model.
Specifications
| Type | Direct Fuel Injection |
|---|---|
| Size (cc) | 2488 |
| Size (L) | - |
| Induction | Inline 4 Cylinder |
| Camshaft | VARIABLE DOUBLE OVERHEAD CAM |
| Valves/Ports per Cylinder | 16 |
| Power | 139kW |
| Power RPM | 6000 |
| Torque | 252Nm |
| Torque RPM | 4000 |
| Bore Stroke | 89x100 |
| Compression Ratio | 13.00 |
| Transmission | 6 Speed Manual |
|---|---|
| Final Gear Ratio | 4.105 |
| Suspension Front | macpherson strut |
| Suspension Rear | torsion beam |
| Steering Mechanism | RACK & PINION - POWER ASSISTED |
| Drive | FWD |
| Fuel Combined (L/100km) | 6.3 |
|---|---|
| Fuel Urban (L/100km) | 8.3 |
| Fuel Extra Urban (L/100km) | 5.1 |
| Tank Size (L) | 51 |
| Fuel Type | unleaded petrol |
| e10 Compatible | yes |
| CO2 Combined | 146 |
| CO2 Urban | - |
| CO2 Extra Urban | - |
| Brake Front | DISC - VENTILATED |
|---|---|
| Brake Rear | DISC |
| Tyre Front | 215/45 R18 89W |
| Tyre Rear | 215/45 R18 89W |
| Front Rim Size | 7x18 |
| Rear Rim Size | 7x18 |
| Vehicle Height (mm) | 1440 |
|---|---|
| Vehicle Length (mm) | 1435 |
| Vehicle Width (mm) | 1795 |
| Ground Clearance (mm) | 150 |
| Wheelbase (mm) | 2725 |
| Turning Circle (m) | 10.6 |
| Unladen Weight (kg) | 1339 |
| Gross Combined Weight (kg) | - |
| Gross Vehicle Weight (kg) | - |
| Track Front | - |
| Track Rear | - |
| Towing Capacity Brake (kg) | 1200 |
| Towing Capacity Unbraked (kg) | 600 |
| Compliance Plate Location | Lower Pass Side Centre Pillar |
|---|---|
| Country Of Origin | Japan |
| Number of Doors | 4 |
| Seats | 5 |
| Service Interval KMs | 10 |
| Service Interval Months | 12 |
| VIN Location | Driver Side Front Floor |
| VIN Number | JM0BP2HL601123456 |
| Warranty KMs | 999 |
| Warranty Months | 60 |
| Discontinued Date | 31/10/2021 |
| ANCAP Rating | 5 |
|---|---|
| Euro Air Pollution Standard | EURO 5 |