The 2017 Mazda 6 Mazda
ATENZA is a front-wheel drive four-door sedan that was released to the Australian market on 245th September 2016
classified as a 6C MY17 (GL). The Mazda Mazda 6 is regarded as a 4d sedan built in Japan with prices from a dealer as a used car starting at $21,000.
The Mazda Mazda 6 is a front-wheel drive 4 door with 5 seats, powered by a 2.5L INLINE 4 engine that has 138 kW of power (at 5700 rpm) and 250 Nm of torque (at 3250 rpm) via a Six-speed Automatic. Mazda claims the Mazda 6 ATENZA uses 6.6L/100km of Unleaded Petrol in the combined city and highway cycle while putting out 153g of CO2. It has a 62L fuel tank, meaning it should be able to travel 939km per full tank.
The Mazda Mazda 6 measures 1450mm (57.1 inches) in height, 4865mm (191.5 inches) in length, 1840mm (72.4 inches) in width with a 2830mm (111.4 inches) wheelbase that brings about a total of 1503kg (3313.5 lbs) of unladen weight. The Mazda 6 ATENZA comes standard with 225/45 R19 front tyres and 225/45 R19 rear tyres. It requires a service every 12 months or 10,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.
The 2017 Mazda Mazda 6 ATENZA has a 165mm ground clearance with a 1500kg braked and 550kg unbraked towing capacity. It has a final gear ratio of 4.056.
The Mazda Mazda 6 has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to JMOGJ103100123456.
