The 2018 Mazda 6 Mazda
ATENZA is a front-wheel drive four-door wagon that was released to the Australian market on 152nd June 2018
classified as a 6C MY18 (GL). The Mazda Mazda 6 is regarded as a 4d wagon built in Japan with prices from a dealer as a used car starting at $25,500.
The Mazda Mazda 6 is a front-wheel drive 4 door with 5 seats, powered by a 2.2L DIESEL TURBO 4 engine that has 140 kW of power (at 4500 rpm) and 420 Nm of torque (at 2000 rpm) via a Six-speed Automatic. Mazda claims the Mazda 6 ATENZA uses 5.3L/100km of Diesel in the combined city and highway cycle while putting out 139g of CO2. It has a 62L fuel tank, meaning it should be able to travel 1170km per full tank.
The Mazda Mazda 6 measures 1480mm (58.3 inches) in height, 4800mm (189.0 inches) in length, 1840mm (72.4 inches) in width with a 2750mm (108.3 inches) wheelbase that brings about a total of 1593kg (3512.0 lbs) of unladen weight. The Mazda 6 ATENZA comes standard with 225/45 R19 front tyres and 225/45 R19 rear tyres. It requires a service every 12 months or 10,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.
The 2018 Mazda Mazda 6 ATENZA has a 165mm ground clearance with a 1600kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 3.804.
The Mazda Mazda 6 has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to JM0GL102300123456.
