1. Home
    2. Research
    3. Mazda
    4. Mazda 6
    5. 2020
    6. Price & Specs
    7. ATENZA 100TH ANNIVERSARY
    Mazda 6

    2020 Mazda 6 Atenza 100th Anniversary Pricing and Spec

    From

    $39,000

    excl. on-roads

    Overview

    The 2020 Mazda Mazda6 ATENZA 100TH ANNIVERSARY is a front wheel drive 4 Door Wagon that was released to the Australian market on 7th January 2020 classified as a GL. The Mazda Mazda6 is regarded as a medium built in Japan with prices from a dealer as a used car starting at $39,000.

    The Mazda Mazda6 is a front wheel drive 4 door with 5 seats, powered by a 2.5L Turbo 4 Cylinder engine that has 170 kW of power (at 5000 rpm) and 420 Nm of torque (at 2000 rpm) via a 6 Speed Automatic. Mazda claims the Mazda 6 ATENZA 100TH ANNIVERSARY uses 7.6L/100km of unleaded petrol in the combined city and highway cycle while putting out 178g of CO2. It has a 62L fuel tank, meaning it should be able to travel 816km per full tank.

    The Mazda Mazda6 measures 1480mm (58.3 inches) in height, 4800mm (189.0 inches) in length, 1840mm (72.4 inches) in width with a 2750mm (108.3 inches) wheelbase that brings about a total of 1526kg (3364.3 lbs) of unladen weight. The Mazda 6 ATENZA 100TH ANNIVERSARY comes standard with 225/45 R19 front tyres and 225/45 R19 rear tyres. It requires a service every 6 months or 10,000 km, whichever comes first. It has a 60 month, unlimited kilometre warranty.

    The 2020 Mazda Mazda6 ATENZA 100TH ANNIVERSARY has a 165mm ground clearance with a 1500kg braked and 550kg unbraked towing capacity. It has a final gear ratio of 4.090.

    The Mazda Mazda6 has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to JM0GL103300123456.

    Best For
    Family
    Transporting
    Warranty
    5Years
    or
    unlimited km
    ANCAP Safety Rating
    Fuel Efficiency
    62 L816 km
    4 Door Wagon
    petrol
    2.5L
    FWD
    6 AT
    5
    4

    Dimensions

    1480mm
    1840mm
    4800mm

    The dimensions shown above are for the base model.

    Specifications

    TypeTurbo Direct Fuel Injection
    Size (cc)2488
    Size (L)-
    InductionTurbo 4 Cylinder
    CamshaftVARIABLE DOUBLE OVERHEAD CAM
    Valves/Ports per Cylinder16
    Power170kW
    Power RPM5000
    Torque420Nm
    Torque RPM2000
    Bore Stroke89x100
    Compression Ratio14.50

    Transmission6 Speed Automatic
    Final Gear Ratio4.090
    Suspension Frontanti roll bar, coil spring, gas damper, macpherson strut
    Suspension Rearanti roll bar, multi-link system, coil spring, gas damper
    Steering MechanismRACK & PINION - POWER ASSISTED
    DriveFWD

    Fuel Combined (L/100km)7.6
    Fuel Urban (L/100km)10.1
    Fuel Extra Urban (L/100km)6.2
    Tank Size (L)62
    Fuel Typeunleaded petrol
    e10 Compatible-
    CO2 Combined178
    CO2 Urban136
    CO2 Extra Urban144

    Brake FrontDISC - VENTILATED
    Brake RearDISC
    Tyre Front225/45 R19
    Tyre Rear225/45 R19
    Front Rim Size7.5x19
    Rear Rim Size7.5x19

    Vehicle Height (mm)1480
    Vehicle Length (mm)4800
    Vehicle Width (mm)1840
    Ground Clearance (mm)165
    Wheelbase (mm)2750
    Turning Circle (m)11.2
    Unladen Weight (kg)1526
    Gross Combined Weight (kg)-
    Gross Vehicle Weight (kg)-
    Track Front-
    Track Rear-
    Towing Capacity Brake (kg)1500
    Towing Capacity Unbraked (kg)550

    Compliance Plate LocationLower Pass Side Centre Pillar
    Country Of OriginJapan
    Number of Doors4
    Seats5
    Service Interval KMs10
    Service Interval Months6
    VIN LocationDriver Side Front Floor
    VIN NumberJM0GL103300123456
    Warranty KMs999
    Warranty Months60
    Discontinued Date31/12/2020

    ANCAP Rating5
    Euro Air Pollution StandardEURO 5