2019 Mercedes-Benz Marco Polo 116CDI Pricing and Spec

The 2019 Mercedes-Benz Marco Polo 116CDI is a rear-wheel drive three-door wagon that was released to the Australian market on 182nd July 2019 classified as a 447 MY20. The Mercedes-Benz Marco Polo is regarded as a 3d wagon built in Germany with prices from a dealer as a used car starting at $44,700.

The Mercedes-Benz Marco Polo is a rear-wheel drive 3 door with 7 seats, powered by a 2.1L DIESEL TURBO 4 engine that has 120 kW of power (at 3800 rpm) and 380 Nm of torque (at 1400 rpm) via a Seven-speed Automatic G-Tronic. Mercedes-Benz claims the Marco Polo 116CDI uses 6.9L/100km of Diesel in the combined city and highway cycle while putting out 182g of CO₂. It has a 70L fuel tank, meaning it should be able to travel 1014km per full tank.

The Mercedes-Benz Marco Polo measures 1980mm (78.0 inches) in height, 5140mm (202.4 inches) in length, 1928mm (75.9 inches) in width with a 3200mm (126.0 inches) wheelbase that brings about a total of 2353kg (5187.5 lbs) of unladen weight. The Marco Polo 116CDI comes standard with 205/65 R16 front tyres and 205/65 R16 rear tyres. It requires a service every 12 months or 25,000 km, whichever comes first. It has a 36 month, 200km warranty.

The 2019 Mercedes-Benz Marco Polo 116CDI has a 133mm ground clearance with a 2500kg braked and 750kg unbraked towing capacity.

The VIN number can be found on the RHS - Front Suspension Tower and the compliance plate is located on the Lower Pass Side B-Pillar. An example VIN number would be similar to W#$44770323000001.