2020 Mini 3D Hatch JOHN COOPER WORKS GP Pricing and Spec

The 2020 3D Hatch Mini JOHN COOPER WORKS GP is a front-wheel drive three-door hatchback that was released to the Australian market on 61st March 2020 classified as a F56. The Mini 3D Hatch is regarded as a 3d hatchback built in United Kingdom with prices from a dealer as a used car starting at $45,100.

The Mini 3D Hatch is a front-wheel drive 3 door with 4 seats, powered by a 2.0L TURBO 4 engine that has 170 kW of power (at 5200 rpm) and 320 Nm of torque (at 1250 rpm) via an Eight-speed Automatic. Mini claims the 3D Hatch JOHN COOPER WORKS GP uses 6L/100km of Premium Unleaded Petrol in the combined city and highway cycle while putting out 137g of CO₂. It has a 44L fuel tank, meaning it should be able to travel 733km per full tank.

The Mini 3D Hatch measures 1414mm (55.7 inches) in height, 3874mm (152.5 inches) in length, 1727mm (68.0 inches) in width with a 2495mm (98.2 inches) wheelbase that brings about a total of 1180kg (2601.5 lbs) of unladen weight. The 3D Hatch JOHN COOPER WORKS GP comes standard with 205/40 R18 front tyres and 205/40 R18 rear tyres. It requires a service every 12 months or 25,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.

The 2020 Mini 3D Hatch JOHN COOPER WORKS GP has a 143mm ground clearance

The VIN number can be found on the Driver Side Inner Guard and the compliance plate is located on the Pass Side Lower B-Pillar. An example VIN number would be similar to WMWXM920%02A00011.