1. Home
    2. Research
    3. Mini
    4. Convertible
    5. 2019
    6. Price & Specs
    7. JOHN COOPER WORKS
    Mini Convertible

    2019 Mini Convertible John Cooper Works Pricing and Spec

    From

    $42,300

    excl. on-roads

    Overview

    The 2019 Mini Convertible JOHN COOPER WORKS is a front wheel drive 2 Door Convertible that was released to the Australian market on 3rd January 2018 classified as a F57 MY19. The Mini Convertible is regarded as a small built in United Kingdom with prices from a dealer as a used car starting at $42,300.

    The Mini Convertible is a front wheel drive 2 door with 4 seats, powered by a 2.0L Turbo 4 Cylinder engine that has 170 kW of power (at 5200 rpm) and 320 Nm of torque (at 1450 rpm) via a 7 Speed Auto Dual Clutch. Mini claims the Convertible JOHN COOPER WORKS uses 6.3L/100km of premium unleaded petrol in the combined city and highway cycle while putting out 144g of CO2. It has a 44L fuel tank, meaning it should be able to travel 698km per full tank.

    The Mini Convertible measures 1415mm (55.7 inches) in height, 3874mm (152.5 inches) in length, 1727mm (68.0 inches) in width with a 2495mm (98.2 inches) wheelbase that brings about a total of 1435kg (3163.6 lbs) of unladen weight. The Convertible JOHN COOPER WORKS comes standard with 205/40 R18 front tyres and 205/40 R18 rear tyres. It requires a service every 24 months or 25,000 km, whichever comes first. It has a 36 month, unlimited kilometre warranty.

    The 2019 Mini Convertible JOHN COOPER WORKS has a 115mm ground clearance It has a final gear ratio of 2.955.

    The VIN number can be found on the Driver Side Inner Guard and the compliance plate is located on the Pass Side Lower B-Pillar. An example VIN number would be similar to WMWWJ920%03E79382.

    Best For
    City driving
    Luxury
    Fun
    Warranty
    3Years
    or
    unlimited km
    Fuel Efficiency
    44 L698 km
    2 Door Convertible
    petrol
    2.0L
    FWD
    7 AT
    4
    2

    Dimensions

    1415mm
    1727mm
    3874mm

    The dimensions shown above are for the base model.

    Specifications

    TypeTurbo Direct Fuel Injection
    Size (cc)1998
    Size (L)-
    InductionTurbo 4 Cylinder
    CamshaftVARIABLE DOUBLE OVERHEAD CAM
    Valves/Ports per Cylinder16
    Power170kW
    Power RPM5200
    Torque320Nm
    Torque RPM1450
    Bore Stroke82x94.6
    Compression Ratio10.20

    Transmission7 Speed Auto Dual Clutch
    Final Gear Ratio2.955
    Suspension Frontanti roll bar, coil spring, gas damper, macpherson strut
    Suspension Rearanti roll bar, multi-link system, coil spring, gas damper
    Steering MechanismRACK & PINION - POWER ASSISTED
    DriveFWD

    Fuel Combined (L/100km)6.3
    Fuel Urban (L/100km)6.3
    Fuel Extra Urban (L/100km)5.6
    Tank Size (L)44
    Fuel Typepremium unleaded petrol
    e10 Compatible-
    CO2 Combined144
    CO2 Urban170
    CO2 Extra Urban129

    Brake FrontDISC - VENTILATED
    Brake RearDISC
    Tyre Front205/40 R18
    Tyre Rear205/40 R18
    Front Rim Size7Jx18
    Rear Rim Size7Jx18

    Vehicle Height (mm)1415
    Vehicle Length (mm)3874
    Vehicle Width (mm)1727
    Ground Clearance (mm)115
    Wheelbase (mm)2495
    Turning Circle (m)10.8
    Unladen Weight (kg)1435
    Gross Combined Weight (kg)-
    Gross Vehicle Weight (kg)1795
    Track Front-
    Track Rear-
    Towing Capacity Brake (kg)-
    Towing Capacity Unbraked (kg)-

    Compliance Plate LocationPass Side Lower B-Pillar
    Country Of OriginUnited Kingdom
    Number of Doors2
    Seats4
    Service Interval KMs25
    Service Interval Months24
    VIN LocationDriver Side Inner Guard
    VIN NumberWMWWJ920%03E79382
    Warranty KMs999
    Warranty Months36
    Discontinued Date31/03/2019

    ANCAP Rating-
    Euro Air Pollution StandardEURO 6