The 2019 Renault Captur ZEN is a front-wheel drive four-door wagon that was released to the Australian market on 244th September 2017
classified as a J87 MY18. The Renault Captur is regarded as a 4d wagon built in France with prices from a dealer as a used car starting at $14,000.
The Renault Captur is a front-wheel drive 4 door with 5 seats, powered by a 0.9L TURBO 3 engine that has 66 kW of power (at 5250 rpm) and 135 Nm of torque (at 2500 rpm) via a Five-speed Manual. Renault claims the Captur ZEN uses 5.2L/100km of Premium Unleaded Petrol in the combined city and highway cycle while putting out 120g of CO2. It has a 45L fuel tank, meaning it should be able to travel 865km per full tank.
The Renault Captur measures 1566mm (61.7 inches) in height, 4122mm (162.3 inches) in length, 1778mm (70.0 inches) in width with a 2606mm (102.6 inches) wheelbase that brings about a total of 1134kg (2500.0 lbs) of unladen weight. The Captur ZEN comes standard with 205/60 R16 front tyres and 205/60 R16 rear tyres. It requires a service every 12 months or 30,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.
The 2019 Renault Captur ZEN has a 163mm ground clearance with a 900kg braked and 585kg unbraked towing capacity.
The Renault Captur has received a 5 star rating from ANCAP. The VIN number can be found on the RHS - On Floor in Boot Comp and the compliance plate is located on the Pass Side Lower B-Pillar. An example VIN number would be similar to VF12R0515D1234567.
