The 2018 Volkswagen Caddy SWB TSI220 is a front-wheel drive three-door van that was released to the Australian market on 213th August 2017
classified as a 2K MY18. The Volkswagen Caddy is regarded as a 3d van built in Germany with prices from a dealer as a used car starting at $18,100.
The Volkswagen Caddy is a front-wheel drive 3 door with 2 seats, powered by a 1.4L TURBO 4 engine that has 92 kW of power (at 4800 rpm) and 220 Nm of torque (at 1500 rpm) via a Seven-speed Auto Direct Shift. Volkswagen claims the Caddy SWB TSI220 uses 6L/100km of Premium Unleaded Petrol in the combined city and highway cycle while putting out 138g of CO2. It has a 55L fuel tank, meaning it should be able to travel 917km per full tank.
The Volkswagen Caddy measures 1836mm (72.3 inches) in height, 4408mm (173.5 inches) in length, 1773mm (69.8 inches) in width with a 2682mm (105.6 inches) wheelbase that brings about a total of 1321kg (2912.3 lbs) of unladen weight. The Caddy SWB TSI220 comes standard with 205/55 R16 front tyres and 205/55 R16 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.
The 2018 Volkswagen Caddy SWB TSI220 has a 172mm ground clearance with a 1500kg braked and 700kg unbraked towing capacity.
The VIN number can be found on the Drive Side Luggage Compartment and the compliance plate is located on the On C-Pillar Behind LH Door. An example VIN number would be similar to WV2ZZZ2KZGX000001.
