The 2018 Audi A6 ALLROAD QUATTRO 3.0 TDI is an all-wheel drive four-door wagon that was released to the Australian market on 213th August 2017
classified as a 4GH MY18. The Audi A6 is regarded as a 4d wagon built in Germany with prices from a dealer as a used car starting at $36,100.
The Audi A6 is an all-wheel drive 4 door with 5 seats, powered by a 3.0L DIESEL TURBO V6 engine that has 160 kW of power (at 3250 rpm) and 500 Nm of torque (at 1250 rpm) via a Seven-speed Auto Direct Shift. Audi claims the A6 ALLROAD QUATTRO 3.0 TDI uses 5.6L/100km of Diesel in the combined city and highway cycle while putting out 148g of CO2. It has a 65L fuel tank, meaning it should be able to travel 1161km per full tank.
The Audi A6 measures 1452mm (57.2 inches) in height, 4940mm (194.5 inches) in length, 1898mm (74.7 inches) in width with a 2905mm (114.4 inches) wheelbase that brings about a total of 1930kg (4254.9 lbs) of unladen weight. The A6 ALLROAD QUATTRO 3.0 TDI comes standard with 225/45 R19 front tyres and 225/45 R19 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.
The 2018 Audi A6 ALLROAD QUATTRO 3.0 TDI has a 182mm ground clearance with a 2500kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 4.375.
The VIN number can be found on the Driver Side Front Wheel Arch and the compliance plate is located on the Pass Side Lower A-Pillar. An example VIN number would be similar to WAUZZZ4GXCN000011.
