The 2018 Audi S3 2.0 TFSI QUATTRO is an all-wheel drive five-door hatchback that was released to the Australian market on 244th September 2017
classified as a 8V MY18. The Audi S3 is regarded as a 5d hatchback built in Germany with prices from a dealer as a used car starting at $45,100.
The Audi S3 is an all-wheel drive 5 door with 5 seats, powered by a 2.0L TURBO 4 engine that has 213 kW of power (at 5100 rpm) and 380 Nm of torque (at 1800 rpm) via a Six-speed Manual. Audi claims the S3 2.0 TFSI QUATTRO uses 7.1L/100km of Premium Unleaded Petrol in the combined city and highway cycle while putting out 165g of CO2. It has a 55L fuel tank, meaning it should be able to travel 775km per full tank.
The Audi S3 measures 1451mm (57.1 inches) in height, 4322mm (170.2 inches) in length, 1785mm (70.3 inches) in width with a 2627mm (103.4 inches) wheelbase that brings about a total of 1505kg (3318.0 lbs) of unladen weight. The S3 2.0 TFSI QUATTRO comes standard with 225/40 R18 front tyres and 225/40 R18 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 36 month, unlimitedkm warranty.
The 2018 Audi S3 2.0 TFSI QUATTRO has a 119mm ground clearance It has a final gear ratio of 3.087.
The Audi S3 has received a 5 star rating from ANCAP. The VIN number can be found on the RHS - Front Suspension Tower and the compliance plate is located on the Pass Side Lower A-Pillar. An example VIN number would be similar to WAUZZZ8VXHA123456.
