Overview
The 2017 Infiniti Qx80 S PREMIUM is an all wheel drive 4 Door Wagon that was released to the Australian market on 7th January 2015 classified as a Z62. The Infiniti Qx80 is regarded as a SUV upper large built in Japan with prices from a dealer as a used car starting at $55,900.
The Infiniti Qx80 is an all wheel drive 4 door with 8 seats, powered by a 5.6L V8 engine that has 298 kW of power (at 5800 rpm) and 560 Nm of torque (at 4000 rpm) via a 7 Speed Automatic. Infiniti claims the QX80 S PREMIUM uses 14.8L/100km of premium unleaded petrol in the combined city and highway cycle while putting out 350g of CO2. It has a 100L fuel tank, meaning it should be able to travel 676km per full tank.
The Infiniti Qx80 measures 1945mm (76.6 inches) in height, 5305mm (208.9 inches) in length, 2030mm (79.9 inches) in width with a 3075mm (121.1 inches) wheelbase that brings about a total of 2837kg (6254.5 lbs) of unladen weight. The QX80 S PREMIUM comes standard with 275/50 R22 front tyres and 275/50 R22 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 48 month, 100km warranty.
The 2017 Infiniti Qx80 S PREMIUM has a 287mm ground clearance with a 3500kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 3.357.
The VIN number can be found on the Mid Driver Side Chassis and the compliance plate is located on the Lower Pass Side B-Pillar. An example VIN number would be similar to JN1JANZ62A0000011.
Dimensions
The dimensions shown above are for the base model.
Specifications
| Type | Multi Point Fuel Injection |
|---|---|
| Size (cc) | 5552 |
| Size (L) | - |
| Induction | V8 |
| Camshaft | VARIABLE DOUBLE OVERHEAD CAM |
| Valves/Ports per Cylinder | 32 |
| Power | 298kW |
| Power RPM | 5800 |
| Torque | 560Nm |
| Torque RPM | 4000 |
| Bore Stroke | 98x92 |
| Compression Ratio | 10.80 |
| Transmission | 7 Speed Automatic |
|---|---|
| Final Gear Ratio | 3.357 |
| Suspension Front | anti roll bar, coil spring, double wishbone, gas damper |
| Suspension Rear | anti roll bar, coil spring, double wishbone, gas damper |
| Steering Mechanism | RACK & PINION - POWER ASSISTED |
| Drive | AWD |
| Fuel Combined (L/100km) | 14.8 |
|---|---|
| Fuel Urban (L/100km) | 20.9 |
| Fuel Extra Urban (L/100km) | 11.3 |
| Tank Size (L) | 100 |
| Fuel Type | premium unleaded petrol |
| e10 Compatible | - |
| CO2 Combined | 350 |
| CO2 Urban | 494 |
| CO2 Extra Urban | 268 |
| Brake Front | DISC - VENTILATED |
|---|---|
| Brake Rear | DISC - VENTILATED |
| Tyre Front | 275/50 R22 |
| Tyre Rear | 275/50 R22 |
| Front Rim Size | 8x22 |
| Rear Rim Size | 8x22 |
| Vehicle Height (mm) | 1945 |
|---|---|
| Vehicle Length (mm) | 5305 |
| Vehicle Width (mm) | 2030 |
| Ground Clearance (mm) | 287 |
| Wheelbase (mm) | 3075 |
| Turning Circle (m) | 12.6 |
| Unladen Weight (kg) | 2837 |
| Gross Combined Weight (kg) | - |
| Gross Vehicle Weight (kg) | 3500 |
| Track Front | - |
| Track Rear | - |
| Towing Capacity Brake (kg) | 3500 |
| Towing Capacity Unbraked (kg) | 750 |
| Compliance Plate Location | Lower Pass Side B-Pillar |
|---|---|
| Country Of Origin | Japan |
| Number of Doors | 4 |
| Seats | 8 |
| Service Interval KMs | 15 |
| Service Interval Months | 12 |
| VIN Location | Mid Driver Side Chassis |
| VIN Number | JN1JANZ62A0000011 |
| Warranty KMs | 100 |
| Warranty Months | 48 |
| Discontinued Date | 28/02/2018 |
| ANCAP Rating | - |
|---|---|
| Euro Air Pollution Standard | EURO 4 |