The 2020 Renault Captur S-EDITION is a front-wheel drive four-door wagon that was released to the Australian market on 305th November 2018
classified as a J87 MY19. The Renault Captur is regarded as a 4d wagon built in Spain with prices from a dealer as a used car starting at $17,900.
The Renault Captur is a front-wheel drive 4 door with 5 seats, powered by a 1.3L TURBO 4 engine that has 110 kW of power (at 5250 rpm) and 250 Nm of torque (at 1600 rpm) via a Six-speed Auto Dual Clutch. Renault claims the Captur S-EDITION uses 5.4L/100km of Premium Unleaded Petrol in the combined city and highway cycle while putting out 120g of CO2. It has a 45L fuel tank, meaning it should be able to travel 833km per full tank.
The Renault Captur measures 1566mm (61.7 inches) in height, 4122mm (162.3 inches) in length, 1778mm (70.0 inches) in width with a 2606mm (102.6 inches) wheelbase that brings about a total of 1284kg (2830.7 lbs) of unladen weight. The Captur S-EDITION comes standard with 205/55 R17 front tyres and 205/55 R17 rear tyres. It requires a service every 12 months or 30,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.
The 2020 Renault Captur S-EDITION has a 163mm ground clearance with a 900kg braked and 675kg unbraked towing capacity.
The VIN number can be found on the RHS - On Floor in Boot Comp and the compliance plate is located on the Pass Side Lower B-Pillar. An example VIN number would be similar to VF12R241AD1234567.
