The 2018 C-HR Toyota
(2WD) is a front-wheel drive four-door wagon that was released to the Australian market on 305th November 2017
classified as a NGX10R UPDATE. The Toyota C-HR is regarded as a 4d wagon built in Japan with prices from a dealer as a used car starting at $19,300.
The Toyota C-HR is a front-wheel drive 4 door with 5 seats, powered by a 1.2L TURBO 4 engine that has 85 kW of power (at 5200 rpm) and 185 Nm of torque (at 1500 rpm) via a Six-speed Manual. Toyota claims the C-HR (2WD) uses 5.4L/100km of Premium Unleaded Petrol in the combined city and highway cycle while putting out 141g of CO2. It has a 50L fuel tank, meaning it should be able to travel 926km per full tank.
The Toyota C-HR measures 1565mm (61.6 inches) in height, 4360mm (171.7 inches) in length, 1795mm (70.7 inches) in width with a 2640mm (103.9 inches) wheelbase that brings about a total of 1425kg (3141.6 lbs) of unladen weight. The C-HR (2WD) comes standard with 215/60 R17 front tyres and 215/60 R17 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 36 month, 100km warranty.
The 2018 Toyota C-HR (2WD) has a 154mm ground clearance with a 1100kg braked and 720kg unbraked towing capacity. It has a final gear ratio of 4.538.
The Toyota C-HR has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Upper Pass Side C-Pillar. An example VIN number would be similar to JTNKY3BX391234567.
