The 2020 C-HR Toyota
KOBA (2WD) HYBRID is a front-wheel drive four-door wagon that was released to the Australian market on 214th August 2020
classified as a ZYX10R. The Toyota C-HR is regarded as a 4d wagon built in Japan with prices from a dealer as a used car starting at $36,400.
The Toyota C-HR is a front-wheel drive 4 door with 5 seats, powered by a 1.8L INLINE 4 engine that has 72 kW of power (at 5200 rpm) and 142 Nm of torque (at 4000 rpm) via a Continuous Variable. Toyota claims the C-HR KOBA (2WD) HYBRID uses 4.3L/100km of Unleaded Petrol-Electric Hybrid in the combined city and highway cycle while putting out 97g of CO2. It has a 43L fuel tank, meaning it should be able to travel 1000km per full tank.
The Toyota C-HR measures 1565mm (61.6 inches) in height, 4390mm (172.8 inches) in length, 1795mm (70.7 inches) in width with a 2640mm (103.9 inches) wheelbase that brings about a total of 1420kg (3130.6 lbs) of unladen weight. The C-HR KOBA (2WD) HYBRID comes standard with 225/50 R18 95V front tyres and 225/50 R18 95V rear tyres. It requires a service every 6 months or 10,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.
The 2020 Toyota C-HR KOBA (2WD) HYBRID has a 137mm ground clearance It has a final gear ratio of 3.218.
The Toyota C-HR has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Upper Pass Side C-Pillar. An example VIN number would be similar to JTNK93BX901123456.
