The 2021 Toyota C-HR KOBA (2WD) is a front-wheel drive four-door wagon that was released to the Australian market on 214th August 2020
classified as a NGX10R. The Toyota C-HR is regarded as a 4d wagon built in Japan with prices from a dealer as a used car starting at $31,100.
The Toyota C-HR is a front-wheel drive 4 door with 5 seats, powered by a 1.2L TURBO 4 engine that has 85 kW of power (at 5200 rpm) and 185 Nm of torque (at 1500 rpm) via a Continuous Variable. Toyota claims the C-HR KOBA (2WD) uses 6.4L/100km of Premium Unleaded Petrol in the combined city and highway cycle while putting out 144g of CO2. It has a 60L fuel tank, meaning it should be able to travel 938km per full tank.
The Toyota C-HR measures 1565mm (61.6 inches) in height, 4390mm (172.8 inches) in length, 1795mm (70.7 inches) in width with a 2640mm (103.9 inches) wheelbase that brings about a total of 1385kg (3053.4 lbs) of unladen weight. The C-HR KOBA (2WD) comes standard with 225/50 R18 95V front tyres and 225/50 R18 95V rear tyres. It requires a service every 6 months or 10,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.
The 2021 Toyota C-HR KOBA (2WD) has a 137mm ground clearance with a 600kg braked and 600kg unbraked towing capacity. It has a final gear ratio of 5.698.
The Toyota C-HR has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Upper Pass Side C-Pillar. An example VIN number would be similar to JTNKY3BX501123456.
