Overview
The 2020 Toyota Corolla SX HYBRID is a front wheel drive 4 Door Sedan that was released to the Australian market on 9th January 2019 classified as a ZWE211R. The Toyota Corolla is regarded as a small built in Japan with prices from a dealer as a used car starting at $27,100.
The Toyota Corolla is a front wheel drive 4 door with 5 seats, powered by a 1.8L Inline 4 Cylinder engine that has 72 kW of power (at 5200 rpm) and 142 Nm of torque (at 3600 rpm) via a Continuous Variable. Toyota claims the Corolla SX HYBRID uses 3.5L/100km of unleaded petrol/electric in the combined city and highway cycle while putting out 81g of CO2. It has a 43L fuel tank, meaning it should be able to travel 1229km per full tank.
The Toyota Corolla measures 1435mm (56.5 inches) in height, 4630mm (182.3 inches) in length, 1780mm (70.1 inches) in width with a 2700mm (106.3 inches) wheelbase that brings about a total of 1375kg (3031.4 lbs) of unladen weight. The Corolla SX HYBRID comes standard with 195/65 R15 front tyres and 195/65 R15 rear tyres. It requires a service every 12 months or 15,000 km, whichever comes first. It has a 60 month, unlimited kilometre warranty.
The 2020 Toyota Corolla SX HYBRID has a 135mm ground clearance It has a final gear ratio of 2.834.
The Toyota Corolla has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Rear Pass Side Wheel Arch. An example VIN number would be similar to JTDBB3BEX0J123456.
Pros
- Super low running costs
- Good ride and handling balance
- Unpretentious, reliable motoring
Cons
- Hatch has small boot
- Hybrid feels underpowered
- Tyre noise on coarse roads
Dimensions
The dimensions shown above are for the base model.
Specifications
| Type | Multi Point Fuel Injection |
|---|---|
| Size (cc) | 1798 |
| Size (L) | - |
| Induction | Inline 4 Cylinder |
| Camshaft | VARIABLE DOUBLE OVERHEAD CAM |
| Valves/Ports per Cylinder | 16 |
| Power | 72kW |
| Power RPM | 5200 |
| Torque | 142Nm |
| Torque RPM | 3600 |
| Bore Stroke | 80.5x88.3 |
| Compression Ratio | 13.00 |
| Transmission | Continuous Variable |
|---|---|
| Final Gear Ratio | 2.834 |
| Suspension Front | macpherson strut, stabiliser bar |
| Suspension Rear | stabiliser bar, trailing wishbone |
| Steering Mechanism | RACK & PINION - POWER ASSISTED |
| Drive | FWD |
| Fuel Combined (L/100km) | 3.5 |
|---|---|
| Fuel Urban (L/100km) | 3.4 |
| Fuel Extra Urban (L/100km) | 3.6 |
| Tank Size (L) | 43 |
| Fuel Type | unleaded petrol/electric |
| e10 Compatible | - |
| CO2 Combined | 81 |
| CO2 Urban | 77 |
| CO2 Extra Urban | 83 |
| Brake Front | DISC - VENTILATED |
|---|---|
| Brake Rear | DISC |
| Tyre Front | 195/65 R15 |
| Tyre Rear | 195/65 R15 |
| Front Rim Size | 6x15 |
| Rear Rim Size | 6x15 |
| Vehicle Height (mm) | 1435 |
|---|---|
| Vehicle Length (mm) | 4630 |
| Vehicle Width (mm) | 1780 |
| Ground Clearance (mm) | 135 |
| Wheelbase (mm) | 2700 |
| Turning Circle (m) | 10.6 |
| Unladen Weight (kg) | 1375 |
| Gross Combined Weight (kg) | - |
| Gross Vehicle Weight (kg) | 1775 |
| Track Front | - |
| Track Rear | - |
| Towing Capacity Brake (kg) | - |
| Towing Capacity Unbraked (kg) | - |
| Compliance Plate Location | Rear Pass Side Wheel Arch |
|---|---|
| Country Of Origin | Japan |
| Number of Doors | 4 |
| Seats | 5 |
| Service Interval KMs | 15 |
| Service Interval Months | 12 |
| VIN Location | Driver Side Front Floor |
| VIN Number | JTDBB3BEX0J123456 |
| Warranty KMs | 999 |
| Warranty Months | 60 |
| Discontinued Date | 31/03/2020 |
| ANCAP Rating | 5 |
|---|---|
| Euro Air Pollution Standard | EURO 5 |
Compare to...
Other Toyota Corollas