1. Home
    2. Research
    3. Toyota
    4. Granvia
    5. 2020
    6. Price & Specs
    7. VX (8 SEATS)
    Toyota Granvia

    2020 Toyota Granvia VX (8 SEATS) Pricing and Spec

    From

    $47,700

    excl. on-roads

    Overview

    The 2020 Granvia Toyota VX (8 SEATS) is a rear-wheel drive four-door wagon that was released to the Australian market on 182nd July 2019 classified as a GDH303R. The Toyota Granvia is regarded as a 4d wagon built in Japan with prices from a dealer as a used car starting at $47,700.

    The Toyota Granvia is a rear-wheel drive 4 door with 8 seats, powered by a 2.8L DIESEL TURBO 4 engine that has 130 kW of power (at 3400 rpm) and 450 Nm of torque (at 1600 rpm) via a Six-speed Auto Sequential. Toyota claims the Granvia VX (8 SEATS) uses 8L/100km of Diesel in the combined city and highway cycle while putting out 211g of CO2. It has a 70L fuel tank, meaning it should be able to travel 875km per full tank.

    The Toyota Granvia measures 1990mm (78.3 inches) in height, 5300mm (208.7 inches) in length, 1970mm (77.6 inches) in width with a 3210mm (126.4 inches) wheelbase that brings about a total of 2660kg (5864.3 lbs) of unladen weight. The Granvia VX (8 SEATS) comes standard with 235/60 R17 front tyres and 235/60 R17 rear tyres. It requires a service every 6 months or 10,000 km, whichever comes first. It has a 60 month, unlimitedkm warranty.

    The 2020 Toyota Granvia VX (8 SEATS) has a 175mm ground clearance with a 1500kg braked and 400kg unbraked towing capacity. It has a final gear ratio of 3.727.

    The Toyota Granvia has received a 5 star rating from ANCAP. The VIN number can be found on the Driver Side Front Floor and the compliance plate is located on the Pass Side Lower B-Pillar. An example VIN number would be similar to JTFUA3AP201123456.

    Best For
    Family
    Warranty
    5Years
    or
    unlimited km
    ANCAP Safety Rating
    Fuel Efficiency
    70 L875 km
    4D WAGON
    DIESEL
    2.8L
    REAR WHEEL DRIVE
    6 AT
    8
    4

    Dimensions

    1990mm
    1970mm
    5300mm

    The dimensions shown above are for the base model.

    Specifications

    TypeTURBO CDI
    Size (cc)2755
    Size (L)2.8L
    InductionDIESEL TURBO 4
    CamshaftDUAL OVERHEAD CAM
    Valves/Ports per Cylinder16
    Power130kW
    Power RPM3400
    Torque450Nm
    Torque RPM1600
    Bore Stroke-
    Compression Ratio15.6

    Transmission6 SP AUTO SEQUENTIAL
    Final Gear Ratio3.727
    Suspension Front-
    Suspension Rear-
    Steering MechanismRACK & PINION - POWER ASSISTED
    DriveREAR WHEEL DRIVE

    Fuel Combined (L/100km)8
    Fuel Urban (L/100km)8.9
    Fuel Extra Urban (L/100km)7.5
    Tank Size (L)70
    Fuel TypeDIESEL
    e10 Compatibleunknown
    CO2 Combined211
    CO2 Urban-
    CO2 Extra Urban-

    Brake FrontDISC - VENTILATED
    Brake RearDISC - VENTILATED
    Tyre Front235/60 R17
    Tyre Rear235/60 R17
    Front Rim Size7x17
    Rear Rim Size7x17

    Vehicle Height (mm)1990
    Vehicle Length (mm)5300
    Vehicle Width (mm)1970
    Ground Clearance (mm)175
    Wheelbase (mm)3210
    Turning Circle (m)11
    Unladen Weight (kg)2660
    Gross Combined Weight (kg)0
    Gross Vehicle Weight (kg)3500
    Track Front-
    Track Rear-
    Towing Capacity Brake (kg)1500
    Towing Capacity Unbraked (kg)400

    Compliance Plate LocationPass Side Lower B-Pillar
    Country Of OriginJAPAN
    Number of Doors4
    Seats8
    Service Interval KMs10
    Service Interval Months6
    VIN LocationDriver Side Front Floor
    VIN NumberJTFUA3AP201123456
    Warranty KMs-
    Warranty Months60
    Discontinued Date2020-05-31

    ANCAP Rating5
    Euro Air Pollution StandardEURO 5