The 2013 Toyota HiLux WORKMATE is a rear-wheel drive cab chassis that was released to the Australian market on 244th September 2011
classified as a TGN16R MY12. The Toyota HiLux is regarded as a c/chas built in Thailand with prices from a dealer as a used car starting at $12,900.
The Toyota HiLux is a rear-wheel drive 2 door with 3 seats, powered by a 2.7L INLINE 4 engine that has 118 kW of power (at 5200 rpm) and 241 Nm of torque (at 3800 rpm) via a Four-speed Automatic. Toyota claims the HiLux WORKMATE uses 11.5L/100km of Unleaded Petrol in the combined city and highway cycle while putting out 271g of CO2. It has a 76L fuel tank, meaning it should be able to travel 661km per full tank.
The Toyota HiLux measures 1680mm (66.1 inches) in height, 4980mm (196.1 inches) in length, 1760mm (69.3 inches) in width with a 3085mm (121.5 inches) wheelbase that brings about a total of 1430kg (3152.6 lbs) of unladen weight. The HiLux WORKMATE comes standard with 205/70 R15 front tyres and 205/70 R15 rear tyres. It requires a service every 6 months or 10,000 km, whichever comes first. It has a 36 month, 100km warranty.
The 2013 Toyota HiLux WORKMATE has a 177mm ground clearance with a 2250kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 4.1.
The Toyota HiLux has received a 4 star rating from ANCAP. The VIN number can be found on the Rear Driver Side Chassis and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to MR0CX12G100123456.
