The 2013 Toyota HiLux WORKMATE is a rear-wheel drive cab chassis that was released to the Australian market on 244th September 2011
classified as a KUN16R MY12. The Toyota HiLux is regarded as a c/chas built in Thailand with prices from a dealer as a used car starting at $15,100.
The Toyota HiLux is a rear-wheel drive 2 door with 2 seats, powered by a 3.0L DIESEL TURBO 4 engine that has 126 kW of power (at 3600 rpm) and 343 Nm of torque (at 1400 rpm) via a Five-speed Manual. Toyota claims the HiLux WORKMATE uses 8.1L/100km of Diesel in the combined city and highway cycle while putting out 214g of CO2. It has a 75L fuel tank, meaning it should be able to travel 926km per full tank.
The Toyota HiLux measures 1680mm (66.1 inches) in height, 4980mm (196.1 inches) in length, 1760mm (69.3 inches) in width with a 3085mm (121.5 inches) wheelbase that brings about a total of 1495kg (3295.9 lbs) of unladen weight. The HiLux WORKMATE comes standard with 205/70 R15 front tyres and 205/70 R15 rear tyres. It requires a service every 6 months or 10,000 km, whichever comes first. It has a 36 month, 100km warranty.
The 2013 Toyota HiLux WORKMATE has a 180mm ground clearance with a 2250kg braked and 750kg unbraked towing capacity. It has a final gear ratio of 3.583.
The Toyota HiLux has received a 4 star rating from ANCAP. The VIN number can be found on the Rear Driver Side Chassis and the compliance plate is located on the Lower Pass Side Centre Pillar. An example VIN number would be similar to MR0CZ12G000123456.
