The 2018 HiLux Toyota
WORKMATE is a rear-wheel drive cab chassis that was released to the Australian market on 244th September 2017
classified as a GUN122R MY17. The Toyota HiLux is regarded as a c/chas built in Thailand with prices from a dealer as a used car starting at $21,900.
The Toyota HiLux is a rear-wheel drive 2 door with 2 seats, powered by a 2.4L DIESEL TURBO 4 engine that has 110 kW of power (at 3400 rpm) and 343 Nm of torque (at 1400 rpm) via a Five-speed Manual. Toyota claims the HiLux WORKMATE uses 7.7L/100km of Diesel in the combined city and highway cycle while putting out 203g of CO2. It has a 80L fuel tank, meaning it should be able to travel 1039km per full tank.
The Toyota HiLux measures 1690mm (66.5 inches) in height, 5330mm (209.8 inches) in length, 1800mm (70.9 inches) in width with a 3085mm (121.5 inches) wheelbase that brings about a total of 1570kg (3461.3 lbs) of unladen weight. The HiLux WORKMATE comes standard with 215/65 R16 front tyres and 215/65 R16 rear tyres. It requires a service every 6 months or 10,000 km, whichever comes first. It has a 36 month, 100km warranty.
The 2018 Toyota HiLux WORKMATE has a 0mm ground clearance with a 2500kg braked and 1240kg unbraked towing capacity. It has a final gear ratio of 3.583.
The Toyota HiLux has received a 5 star rating from ANCAP. The VIN number can be found on the Right Rear Chassis Rail and the compliance plate is located on the Pass Side Lower B-Pillar. An example VIN number would be similar to MR0EB3CB000000001.
